8 mm Probes With Armor | Bently Nevada – 330104-00-09-50-02-00

Bently Nevada 3300 XL 8mm Proximity Probe (Model 330104-00-09-50-02-00)

What It Is

A tough sensor for checking industrial machines. Made by Bently Nevada, it’s an 8mm proximity probe with M10 x 1 threads, armored casing, and a 5m cable. Works well in rough spots.

Model Numbers Explained

330104: Base 3300 XL 8mm probe with armor.
-00: No unthreaded part (00mm).
-09: Body length 90mm.
-50: Total cable 5.0m.
-02: Small ClickLoc connector with standard cable.
-00: No extra approvals needed.

Key Specs

Brand: Bently Nevada
Model: 330104-00-09-50-02-00
Tip Material: PPS (tough plastic)
Body Material: AISI 303/304 stainless steel
DC Resistance: 8.73 ± 0.50 Ω (5m length)
Power: -17.5Vdc to -26Vdc (nonincendive); -23Vdc to -26Vdc with barriers
Output: 50Ω resistance
Sensitivity: <2mV change per 1V input change
Seal: Viton® O-ring for pressure.

Works With

Only 3300 XL 8mm Proximitor Sensors and extension cables. 5m probe needs 5m Proximitor. Best with AISI 4140 steel targets.

How to Install

Connect nonincendive circuits as in drawing 140979.
Use zener barriers (drawing 141092) or isolators for safe setups.
Voltages over -23.5Vdc may cut range.

Safety Certificates

ia (safe): Class I, Zone 0; Class 1 Groups A-D; Class II E-G; Class III.
nA/ec (non-spark): Class I, Zone 2; Class 1 Division 2 Groups A-D.

Temperature Limits

EPL Ga/Gc: T1 (-55°C to +232°C) down to T5 (-55°C to +40°C).
EPL Dc: T280°C (Ta -55°C to +232°C) down to T90°C (Ta -55°C to +40°C).

What’s in the Box

1x 3300 XL 8mm Proximity Probe (5m, M10x1 thread, ClickLoc connector).

Download PDF file here:3300 XL 8 mm Proximity Transducer System Datasheet